The TL Audio 5001’s combination of sound and facilities is guaranteed to bring out the best in any microphone – from a low-cost dynamic to a vintage large capsule condenser. Separate input and output level controls allow the valve stages to be driven harder if necessary for increased warmth, while still allowing the overall output level to be regulated – absolutely essential if recording direct to tape.
The output fader of the TL Audio 5001 permits anything from complete attenuation through to +15dB of extra output gain – making it ideal for driving today’s high level digital recorders.
Each channel of the TL Audio 5001 employs one half of an ECC83/12AX7A Sovtek dual triode valve, run from a stabilised 150V DC supply. The valve stage is positioned just after the initial discrete mic preamp stage.
Features
- Continuously variable input & output gain controls
- 48V phantom power switch
- 90Hz low cut filter
- Phase reverse switch
- NEW 30dB mic pad
- NEW Drive & Signal level LEDs assist with gain setting
- NEW Instrument DI inputs
- Balanced XLR mic input
- Balanced XLR line output (+4dB) duplicated on unbalanced jack connector (-10dB)
- NEW Optional four channel 24-bit digital output