SSL Fusion Outboard Processor

SSL Fusion Outboard Processor

The SSL Fusion Outboard Processor introduces six completely new analogue colouration tools designed to bring the perfect combination of added tonal character, weight and space to your mix bus or stereo stems, with the detail, warmth and finesse that only real analogue circuits can provide.

SSL Fusion Outboard Processor Details

The SSL sonic legacy (in the SSL Fusion Outboard Processor) is built upon a much-emulated collection of analogue audio processing tools that have featured in generations of studio consoles; pristine mic pre’s, classic Channel EQ & Dynamics, the legendary Stereo Bus Compressor, the Listen Mic Compressor, and the unique SSL summing bus. SSL Fusion takes SSL into a new era with the introduction of a suite of new analogue processing tools that offer exceptional tonal character and versatility. Fusion expands the processing palette for hybrid studio owners and is a superb partner for the SSL Stereo Bus Compressor.

SSL has also always been known for clever connectivity and features that streamline and accelerate production workflow. SSL Fusion Outboard Processor fits right in with a collection of workflows enhancing features including: +/-12dB Input and Output Trim controls, an Input overload LED, large peak-hold metering, a front-end 3rd order High Pass Filter with three selectable cut off frequencies, and tri-colour status indicators for the Vintage Drive and HF Comp/LMC sections.

A set of XLR connections can be used either as a Stereo Insert for stereo mix bus processing or switched to function as a Mid-Side (MS) circuit enabling separate compressors or EQ to be applied to the middle (centre) and sides of a stereo signal. In Stereo Insert mode the insert point can be switched to pre-Violet EQ, when in MS mode the insert can be switched to pre-Stereo Image controls. Input and Output connections are via XLR.

SSL Fusion Vintage Drive
Vintage Drive – is a unique non-linear harmonic enhancement circuit that brings cohesion and strength to your mix. Drive and Density controls interact to produce harmonic saturation and soft compression derived from overloading an analogue circuit. It can be used lightly for subtle thickening saturation or driven hard for more extreme distortion.

The Violet EQ
The SSL Violet EQ – an all-new minimum phase-shift, two-band shelving EQ. The first new SSL analogue EQ circuit for more than 25 years draws on the SSL legacy of carefully selected frequencies and response curves to create a musical and intuitive EQ designed to quickly dial in low-end weight and high-end sheen. High and Low frequency circuits each offer four switched frequency points and +/-9dB attenuation.

SSL Fusion HF Compressor
A new High Frequency Compressor delivers the distinctive sound of high frequency rounding in the analogue domain. A compressor that effects high frequencies only, optimised for smooth and transparent harshness reduction and a tape-like high-frequency roll off – great for taming brittle high frequency fizz.

Listen Mic Compressor with wet / dry control
The SSL R&D team have something to tell you… To celebrate the launch of Fusion at AES New York back in 2018 and to thank existing and future Fusion users, SSL R&D team have unveiled a secret hidden 6th processor available in ALL Fusion’s. To access the hidden 6th LMC processor – hold down the HF Compressor ‘in’ button for 5 seconds and unlock full band LMC mode. X-Over becomes a wet/dry parallel mix control!

Stereo Image
A new Stereo Image enhancer provides a true analogue Mid-Side circuit that manipulates the Side signal, allowing for widening and spatial manipulation of the stereo field.

SSL Fusion Transformer
A switched, custom-designed SSL Transformer circuit introduces subtle low-frequency saturation, alongside a high-frequency phase-shift. The result is a simultaneous thickening of the low-end and an added sparkle to the high-end.

Specifications

  • Input Impedance: 10kΩ
  • Output Impedance: 75Ω
  • Frequency Response: 20Hz – 20kHz (±0.05dB)
  • THD + Noise: < 0.005%, 0.0025% typical
  • Noise: < -86dBu, -91dBu typical
  • Crosstalk: < -110dB, -115dB typical
  • Power: 50 watts Maximum, 40 watts typical
  • Dimensions: 480mm x 88.9mm x 328mm
  • Weight: 5.86kg

TRY OUR ‘MY EFFECTS RACK’ FEATURE TO TRACK WHAT YOU HAVE IN YOUR EFFECTS RACK NOW, AND THOSE ITEMS YOU WISH TO ADD.

The details provided above are drawn from historical documents like advertising brochures or user manuals. They’re shared without bias or review. This info is given solely for your consideration, helping you gauge its usefulness to you.

User Reviews

There are currently no reviews, why not be the first?

Used it? Leave your rating and review.

Audio Samples

There are no samples available at the moment. If you can help, please contact us.

Alternatives

Currently no information available…

Plugin Alternatives

Currently no information available…

Classic Tracks

Currently no information available…
The absence of information doesn’t necessarily mean it hasn’t been used on classic tracks or albums; it just means we don’t have the details.

Famous Racks
Related Articles

No results found.

Leave a Reply

Just a Quick

Question?

Can you tell us quickly what it is you love about Vintage Digital, and what it is you would like to see more of on the site? Is there anything you think we should add?
Let us know!