Kurzweil Mangler

Kurzweil Mangler Multi-Effects Processor

Kurzweil Mangler is based on the effects found in the KSP8, Kurzweil's flagship multichannel effects processor, and offer easy-to-use effect presets for any environment. Both models are single rack space units featuring 192 effects presets, 64 locations for user-created presets, balanced stereo analogue inputs and outputs, S/PDIF digital I/O, and pre-effect EQ.

Kurzweil Mangler Multi-Effects Processor Details

The Kurzweil Mangler focuses on effects other than, but not excluding, reverb. These include chorus, flanger, phaser, tremolo, rotary speaker, panner, delay, filters, LaserVerb, Pitcher , synth trigger, ring modulation, distortion, and compression effects, and many combinations.

You can access all the effects in your Kurzweil Mangler using the BANK and PRESET knobs on the front panel. Turn the BANK knob to select the general type of effect. Then turn the PRESET knob to display the 16 different effects in the current bank. Appendix A provides a list of the effects included with each unit.

When you start customising effects in the Kurzweil Mangler, you’ll be able to store them in the banks labelled User 1 through User 4. Like the other banks, each of the User banks can store 16 different effects.

The power supply is a standard 9V AC 2-amp external supply. There is no power switch; your Kurzweil Mangler will be ready to use as soon as you plug it in. You can attach both analogue and digital input cables to the unit, although you can use only one type of input at a time. Set the Input Source parameter on the Master menu to tell the unit which inputs it should use.

Also, you may want to check the setting of the Wet/Dry Mode parameter, depending on whether you’ve connected the unit to your mixer as a direct insert or as a send/ return (bus) effect. Analog and Digital outputs are always available, so that you can use both at the same time.

Stereo analogue inputs and outputs are balanced 1/4” jacks that will accept either balanced TRS (tip-ring-sleeve) or unbalanced TS (tip-sleeve) connectors. When you plug a single cable (i.e., a mono signal) into either analogue input, the unit sends that signal to both input channels (provided that Input Source is set to Analogue, of course). Set the analogue input level using the knob on the front panel of the unit.

Features

  • Stereo Balanced Analog I/O
  • Stereo Digital S/PDIF I/O
  • Stereo and Mono Input Channels
  • Stereo Effects Buses
  • 44.1 kHz and 48 kHz Sampling Frequencies
  • Selectable Bit Depths of 16, 20, and 24 bits
  • 3 band parametric EQ
  • 192 Effects Presets
  • 64 User Locations
  • Extensive MIDI Control
  • Up to 16 Effects Parameters
  • 3-LED Input Signal Level Metering
  • Output Clip LED
  • Tap Tempo and BPM Sync
  • EQ and/or FX Bypass
  • Tap/Bypass Pedal Input

Specifications

  • Analogue Inputs:
    • Two analogue inputs, balanced / unbalanced using 6.35 mm Tip-Ring-Sleeve jacks
    • Input impedance: 20K ohms balanced, 10K ohms unbalanced
    • A/D converter: 24 bit, 128x oversampling
    • Maximum analog input level: +22 dBU balanced
    • Minimum analog input level for 0 dBFS: +4 dBU unbalanced
    • Frequency response: 20 Hz – 20 kHz ± 0.1 dB
    • Dynamic range: > 106 dB unweighted @ 1 kHz from 22 dBU
    • THD+N: <0.001% @ 1 kHz, +19 dBU
    • Crosstalk: < -104 dB @ 1 kHz, +21 dBU
  • Digital Inputs:
    • Stereo S/PDIF digital input (IEC 60958-3)
    • Synchronises to S/PDIF input clock or generates 48 or 44.1 kHz
    • Lock range with external clock: 37 kHz to 49 kHz
    • Impedance: 75 ohms
    • Input word length: up to 24 bits
  • Analogue Outputs:
    • Two analogue outputs, balanced / unbalanced using 6.35 mm Tip-Ring-Sleeve jacks
    • D/A converter: 24 bit, 128x oversampling
    • Maximum analog output level: +22 dBU balanced
    • Minimum analog output level for 0 dBFS: +10 dBU unbalanced
    • Output impedance: 400 ohms balanced, 200 ohms unbalanced
    • Output level switchable from -10 dBV unbalanced to +4 dBU balanced
    • Frequency response: 20 Hz – 20 kHz ± 0.1 dB
    • Dynamic range: > 112 dB unweighted @ 1 kHz from 22 dBU
    • THD+N: <0.003% @ 1 kHz, +19 dBU
    • Crosstalk: < -111 dB @ 1 kHz, +21 dBU
  • Digital Outputs:
    • Stereo S/PDIF digital output (IEC 60958-3)
    • Impedance: 75 ohms
    • Output word length: 16, 20, or 24 bits
  • Dimensions: 45mm x 482mm x 205mm
  • Weight: 2.27 kg

TRY OUR ‘MY EFFECTS RACK’ FEATURE TO TRACK WHAT YOU HAVE IN YOUR EFFECTS RACK NOW, AND THOSE ITEMS YOU WISH TO ADD.

The details provided above are drawn from historical documents like advertising brochures or user manuals. They’re shared without bias or review. This info is given solely for your consideration, helping you gauge its usefulness to you.

There are no samples available at the moment. If you can help, please contact us.

Currently no information available...

Currently no information available...
The absence of information doesn't necessarily mean it hasn’t been used on classic tracks or albums; it just means we don't have the details.

No results found.

No results found.

Unique, useful and sounds amazing

By Hollowman9

Sound Quality 100%
Build Quality 75%
Usefullness 100%
Mojo/Funk 90%
Reliability 100%

I’ve had this since it was new. This is a very deep machine and in all these years I feel I am only still scratching the surface. I probably won’t exhaust its possibilities in my lifetime. I took points off for not having a power switch and for the line lump PSU. Beyond that it’s hard to find fault.

To my ears it sounds awesome and has incredibly nice conversion. Sometimes I run other effects into it digitally just to use its converters. The algorithms are a mixed bag. Some sound as generic as your average VST effects, but others are absolutely outstanding.

With tweaking there’s much more than meets the eye. Even the tame sounding algorithms have extended parameters which can be used to wake them up and make them shine. The more extreme algorithms are cool AF. The unusual reverbs and delays can trip you out for endless hours. The overdrives and distortions are full and organic. The Quantize + Alias can be very carefully adjusted to emulate the different sounds of vintage samplers closely.

The frequency shifter and ringmod are the best examples I’ve ever heard. The compression algorithms are surprisingly good! I would use them on a mix bus without hesitation. When you dig deep into the extended parameters you inevitably find gold. Just make sure you have enough time because it’s like a bottomless pit. If they ever reissue this machine take my money, please.

Used it? Leave your rating and review.

Leave a Reply

Just a Quick

Question?

Can you tell us quickly what it is you love about Vintage Digital, and what it is you would like to see more of on the site? Is there anything you think we should add?
Let us know!